XYS-CY-0815 Super Duty Rubbing Compound

This product is a professional paint abrasive agent used on a polishing machine with a rotating speed of 1400-2000 rpm. It can effectively remove the sand marks of P1000-P1200 sandpaper and other serious scratches and severe oxide layers. If using XYS CY-0187 Fine Polishing Wax, the effect is better!

Construction process

1. Use a wiping cloth to clean the paint surface. Place a suitable amount of CY-0815 on the surface of the paint. Use a wool wheel (sponge wheel) to coat the wax.

2, start the polishing machine with a white rough polishing wheel (sponge wheel) to maintain uniform speed, and gradually test pressure, when the thick wax gradually dry, reduce the pressure continued polishing, until the paint surface is bright!

3. After the defects of the lacquer are finished, wipe the lacquer polishing residue with a wiper!

4, after the end of the rough throw, with XYS CY-0817 fine polishing wax on the paint surface for small scratches, rough wax ring marks and other lacquer enamel to drive out, increase the paint brightness and varnish layer clarity!

Precautions

1. Do not use this product under direct sunlight or hot paint!

2. This product is a heavy abrasive. Please use caution according to the actual situation of the paint surface and the recommended process of XYS!

3, This product needs to stay away from the heat and open fire!

4, when not in use, please tightly cap, do not eat!

5, stored at room temperature, no ice!

6.Avoid children's contact!

Ranges